What's the best lube...

NickPapageorgio · 10-05-2005

For two pieces of plastic that slide against each other? (mind exits gutter)

Something like graphite? White lithium grease? Or will grease break down the plastic material?

Trev · 10-05-2005

Quote:

Originally Posted by NickPapageorgio

For two pieces of plastic that slide against each other? (mind exits gutter)

Something like graphite? White lithium grease? Or will grease break down the plastic material?

Anything that contains silicon.

Edit: and graphite is like carborundum, it'll wear the plastic down over time. Silicon based is the best option.

Dravyk · 10-05-2005

This thread is no fun without pics.

Scratch that, probably wouldn't be fun with pics either.

Trev · 10-05-2005

Quote:

Originally Posted by Dravyk

This thread is no fun without pics.

Scratch that, probably wouldn't be fun with pics either.

Unless you're NickP, or an ex-mechanical engineer (with sparks), then I guess this thread wouldn't be too hot.

Newton · 10-05-2005

If it rubs constantly, secure it .. then use silicon gel as trev suggested ..

Trev · 10-05-2005

Quote:

Originally Posted by Newton

If it rubs constantly, secure it .. then use silicon gel as trev suggested ..

I did on both accounts, I married her - then used silicon gel

domtheboy · 10-05-2005

Quote:

Originally Posted by Trev

I did on both accounts, I married her - then used silicon gel

Heed your own warning dude, it'll wear away over time if you carry on

Trev · 10-05-2005

Quote:

Originally Posted by domtheboy

Heed your own warning dude, it'll wear away over time if you carry on

Not with Silicon

domtheboy · 10-05-2005

Quote:

Originally Posted by Trev

Not with Silicon

Must be shit hot stuff, where's that screwfix direct catalogue....

Trev · 10-05-2005

Quote:

Originally Posted by domtheboy

Must be shit hot stuff, where's that screwfix direct catalogue....

Order number #30454...

Lost meself for a moment there

domtheboy · 10-05-2005

Quote:

Originally Posted by Trev

Order number #30454...

Lost meself for a moment there

DannyCox · 10-05-2005

Quote:

Originally Posted by NickPapageorgio

For two pieces of plastic that slide against each other?

That all depends on what types of plastic materials you are talking about. Silicon can leach into various plastics causing degradation. Lithium won't adhere in most cases, and just squeeze out. Graphite based lubricants can create severe wear in certain plastics.

I may have forgot to mention that in my "Pre-Porn" life I was a Mechanical Engineer, working in Aerospace & Defence, who specialized in Plastics & Composite Material & Processes

Let me know what you are trying to lubricate, and I can help you out

Dravyk · 10-05-2005

Quote:

Originally Posted by DannyCox

I may have forgot to mention that in my "Pre-Porn" life I was a Mechanical Engineer, working in Aerospace & Defence, who specialized in Plastics & Composite Material & Processes

I've been in the biz too long. Nothing surprises me anymore.

DannyCox · 10-05-2005

My last day on the job, when I retired to work in this Biz full-time ... March 3rd, 1997

Porn has been berry, berry good to me!

Dravyk · 10-05-2005

Quote:

Originally Posted by DannyCox

My last day on the job, when I retired to work in this Biz full-time ... March 3rd, 1997

Porn has been berry, berry good to me!

And that testimonial came from a rocket scientist!!

NickPapageorgio · 10-05-2005

Quote:

Originally Posted by DannyCox

That all depends on what types of plastic materials you are talking about. Silicon can leach into various plastics causing degradation. Lithium won't adhere in most cases, and just squeeze out. Graphite based lubricants can create severe wear in certain plastics.

I may have forgot to mention that in my "Pre-Porn" life I was a Mechanical Engineer, working in Aerospace & Defence, who specialized in Plastics & Composite Material & Processes

Let me know what you are trying to lubricate, and I can help you out

http://www.stuffyourown.com/escortdeluxe.html There it is. Not sure what type of plastic it is but there is one piece that slides when you actually load the cigarette tube and I'd like it to move as smooth as possible. As stupid as it sounds...

DannyCox · 10-05-2005

You wouldn't want to lubricate that at all. You'll just end up degrading what you have. It's mentioned that it is made out of ABS plastic, which is Acrylonitrile Butadiene Styrene. The Butadiene acts as a self-lubricant, and also gives some flexibility and good wear resistance (depending on percentage). There is a very good chance that the actual filler tube is made from Nylon (probably 6/6). You really don't need anything between the ABS and the Nylon, and if you do put something there, it will only create problems.

Plus, any lube you do use will just leach into the tobacco.

Nickatilynx · 10-05-2005

Quote:

Originally Posted by DannyCox

Plus, any lube you do use will just leach into the tobacco.

yeah.... the tobacco..thats it...

;-)))

DannyCox · 10-05-2005

Well, if you can smoke it, and it's somewhat of a leafy substance...it's tobacco!

Just my way of being PC

sarettah · 10-06-2005

Don't even have to read the thread to answer this question...

KY... always the best choice when you need some extra slippy.....

(or if needed you can substitute WD40 in all applications where you would usually use KY)

sarettah · 10-06-2005

Now that I've read part of the thread...

Learn to roll by hand you sissy.....

Trev · 10-06-2005

A cig rolling machine... this thread was created for a cig rolling machine

Bhelliom · 10-06-2005

I came in looking for pics.... got lost for a while in technical-ese ... came back and got interested when I saw the Joint rolling machine.

Which is way more interesting than listening to a bunch of rocket scientists turned porners talk about plastic....

DannyCox · 10-06-2005

But Bhelliom, if it wasn't for plastics, what would you do for a date??

Those wooden sex dolls sure do have a problem with splinters!

Nickatilynx · 10-06-2005

Quote:

Originally Posted by DannyCox

But Bhelliom, if it wasn't for plastics, what would you do for a date??

Those wooden sex dolls sure do have a problem with splinters!

umm we have just seen the rarely seen , Danny Cox , "Atomic Burn"

ahahahahhahahahahahahahahahahahah

Bhelliom · 10-06-2005

I'm hurt.

Deep down inside i'm crying.

Newton · 10-06-2005

Sorry Bhelliom I had to give DannyCox points for that burn

Bhelliom · 10-06-2005

damnit

he'll pay.... oh yes... he'll pay. Maybe not today, maybe not tomorrow.... but soon...

ReighlynnRaine · 10-06-2005

Well since this isn't what I thought it was going to be I have no input.

Trev · 10-06-2005

Quote:

Originally Posted by ReighlynnRaine

Well since this isn't what I thought it was going to be I have no input.

I would have to agree with Danny, ABS is a fantastic plastic, but it's a swine to machine

domtheboy · 10-06-2005

This thread is like Paul Gascoigne, it promised so much early on (particularly in it's title) but then just went on to become obese and not do very much

Trev · 10-06-2005

Quote:

Originally Posted by domtheboy

This thread is like Paul Gascoigne, it promised so much early on (particularly in it's title) but then just went on to become obese and not do very much

It pains me to do it, but I would have to agree.... but then gazza is a fat geordie pie eating bastard, so that might have something to do with it as well

Trev · 10-06-2005

Quote:

Originally Posted by Trev

It pains me to do it, but I would have to agree.... but then gazza is a fat geordie pie eating bastard, so that might have something to do with it as well

Bugger, except he's not fat anymore.

Newton · 10-06-2005

He still manages to cry a lot

Trev · 10-06-2005

Quote:

Originally Posted by Newton

He still manages to cry a lot

Do you know hoe much he's had to give his lass after slapping her around... you'd cry as well

Skinny Geordie bastard deserves it

DannyCox · 10-06-2005

Quote:

Originally Posted by Nickatilynx

umm we have just seen the rarely seen , Danny Cox , "Atomic Burn"

I really, really tried hard to hold back, but.....

Dravyk · 10-06-2005

Bob Villa came reading this.

MorganGrayson · 10-06-2005

sarettah · 10-06-2005

Quote:

Originally Posted by MorganGrayson

Morgan, dear sweet Morgan...

Bob Villa (mechanical type - engineer type - makes everything with his own hands in a half hour on TV type) came (as in orgasmed, spurted, popped his juice, spit the white one, spluged, splattered, spunked) reading (as in digesting within the cerebral cortex via the transmission of the visible word) this (as in the particular thread in which these posts exist).

Dravyk · 10-06-2005

Quote:

Originally Posted by sarettah

Morgan, dear sweet Morgan...

Bob Villa (mechanical type - engineer type - makes everything with his own hands in a half hour on TV type) came (as in orgasmed, spurted, popped his juice, spit the white one, spluged, splattered, spunked) reading (as in digesting within the cerebral cortex via the transmission of the visible word) this (as in the particular thread in which these posts exist).

The guy on the original "This Old House" on PBS ... lampooned as Tim "The Tool Man" Taylor by Tim Allen on "Home Improvement".

ReighlynnRaine · 10-07-2005

Quote:

Originally Posted by sarettah

Morgan, dear sweet Morgan...

Bob Villa (mechanical type - engineer type - makes everything with his own hands in a half hour on TV type) came (as in orgasmed, spurted, popped his juice, spit the white one, spluged, splattered, spunked) reading (as in digesting within the cerebral cortex via the transmission of the visible word) this (as in the particular thread in which these posts exist).

NickPapageorgio · 10-07-2005

Quote:

Originally Posted by sarettah

Now that I've read part of the thread...

Learn to roll by hand you sissy.....

I do roll by hand...this is for rolling cigarettes...

...what...

sarettah · 10-07-2005

Quote:

Originally Posted by NickPapageorgio

I do roll by hand...this is for rolling cigarettes...

Yeah, ok, um hum..

That's what I tell the guy every time I go to buy papers.

(Joker 1 and a halfs to be exact)

10-05-2005	#1
NickPapageorgio Members Join Date: Jul 2004 Posts: 843	What's the best lube... For two pieces of plastic that slide against each other? (mind exits gutter) Something like graphite? White lithium grease? Or will grease break down the plastic material?

10-05-2005	#5
Newton It's always business, never personal! The POWER of radio Oprano Radio Join Date: Aug 2004 Location: On a golf course Posts: 4,916	Re: What's the best lube... If it rubs constantly, secure it .. then use silicon gel as trev suggested .. __________________ Poser Bush in a mix-up over his hi-tech gizmo - ICLOD

10-05-2005	#14
DannyCox I like cheese Join Date: Aug 2003 Location: Montreal, QC, CA Posts: 1,185	Re: What's the best lube... My last day on the job, when I retired to work in this Biz full-time ... March 3rd, 1997 Porn has been berry, berry good to me! __________________ iAmateurs Network Amateur Niche Affiliate Programs

10-05-2005	#17
DannyCox I like cheese Join Date: Aug 2003 Location: Montreal, QC, CA Posts: 1,185	Re: What's the best lube... You wouldn't want to lubricate that at all. You'll just end up degrading what you have. It's mentioned that it is made out of ABS plastic, which is Acrylonitrile Butadiene Styrene. The Butadiene acts as a self-lubricant, and also gives some flexibility and good wear resistance (depending on percentage). There is a very good chance that the actual filler tube is made from Nylon (probably 6/6). You really don't need anything between the ABS and the Nylon, and if you do put something there, it will only create problems. Plus, any lube you do use will just leach into the tobacco. __________________ iAmateurs Network Amateur Niche Affiliate Programs

10-05-2005	#19
DannyCox I like cheese Join Date: Aug 2003 Location: Montreal, QC, CA Posts: 1,185	Re: What's the best lube... Well, if you can smoke it, and it's somewhat of a leafy substance...it's tobacco! Just my way of being PC __________________ iAmateurs Network Amateur Niche Affiliate Programs

10-05-2005	#3
Dravyk Easy Like Sunday Morning Want to see your own Advertising Here! Join Date: Oct 2002 Location: Behind a couch, somewhere in Philly Posts: 7,628	Re: What's the best lube... This thread is no fun without pics. Scratch that, probably wouldn't be fun with pics either. __________________ All Of 'Em Mainstream Webmasters New: WebmasterConventions.com

10-06-2005	#20
sarettah Stay Out Of The Box Want to see your own Advertising Here! Join Date: Oct 2002 Location: Lost in the ozone Posts: 10,318	Re: What's the best lube... Don't even have to read the thread to answer this question... KY... always the best choice when you need some extra slippy..... (or if needed you can substitute WD40 in all applications where you would usually use KY) __________________ Free Adult Webcams

10-06-2005	#21
sarettah Stay Out Of The Box Want to see your own Advertising Here! Join Date: Oct 2002 Location: Lost in the ozone Posts: 10,318	Re: What's the best lube... Now that I've read part of the thread... Learn to roll by hand you sissy..... __________________ Free Adult Webcams

10-06-2005	#22
Trev Cunty Want to see your own Advertising Here! Join Date: Jan 2003 Posts: 10,150	Re: What's the best lube... A cig rolling machine... this thread was created for a cig rolling machine __________________ Sucks to be you.

10-06-2005	#23
Bhelliom Will fuck for beer Join Date: Jun 2005 Location: Toronto Posts: 1,143	Re: What's the best lube... I came in looking for pics.... got lost for a while in technical-ese ... came back and got interested when I saw the Joint rolling machine. Which is way more interesting than listening to a bunch of rocket scientists turned porners talk about plastic.... __________________ I am a Sado-Machiavellian. As long as I cum in the end... It doesn't matter what I did to get there. :yowsa: I just made that term up.... pretty good eh?

10-06-2005	#24
DannyCox I like cheese Join Date: Aug 2003 Location: Montreal, QC, CA Posts: 1,185	Re: What's the best lube... But Bhelliom, if it wasn't for plastics, what would you do for a date?? Those wooden sex dolls sure do have a problem with splinters! __________________ iAmateurs Network Amateur Niche Affiliate Programs

10-06-2005	#26
Bhelliom Will fuck for beer Join Date: Jun 2005 Location: Toronto Posts: 1,143	Re: What's the best lube... I'm hurt. Deep down inside i'm crying. __________________ I am a Sado-Machiavellian. As long as I cum in the end... It doesn't matter what I did to get there. :yowsa: I just made that term up.... pretty good eh?

10-06-2005	#27
Newton It's always business, never personal! The POWER of radio Oprano Radio Join Date: Aug 2004 Location: On a golf course Posts: 4,916	Re: What's the best lube... Sorry Bhelliom I had to give DannyCox points for that burn __________________ Poser Bush in a mix-up over his hi-tech gizmo - ICLOD

10-06-2005	#28
Bhelliom Will fuck for beer Join Date: Jun 2005 Location: Toronto Posts: 1,143	Re: What's the best lube... damnit he'll pay.... oh yes... he'll pay. Maybe not today, maybe not tomorrow.... but soon... __________________ I am a Sado-Machiavellian. As long as I cum in the end... It doesn't matter what I did to get there. :yowsa: I just made that term up.... pretty good eh?

10-06-2005	#29
ReighlynnRaine Punk Rock Porn Queen Join Date: Sep 2005 Location: California Posts: 548	Re: What's the best lube... Well since this isn't what I thought it was going to be I have no input. __________________ Pretend I said something interesting and quote me. - ME

10-06-2005	#31
domtheboy Members Join Date: Feb 2005 Posts: 612	Re: What's the best lube... This thread is like Paul Gascoigne, it promised so much early on (particularly in it's title) but then just went on to become obese and not do very much

10-06-2005	#34
Newton It's always business, never personal! The POWER of radio Oprano Radio Join Date: Aug 2004 Location: On a golf course Posts: 4,916	Re: What's the best lube... He still manages to cry a lot __________________ Poser Bush in a mix-up over his hi-tech gizmo - ICLOD

10-06-2005	#37
Dravyk Easy Like Sunday Morning Want to see your own Advertising Here! Join Date: Oct 2002 Location: Behind a couch, somewhere in Philly Posts: 7,628	Re: What's the best lube... Bob Villa came reading this. __________________ All Of 'Em Mainstream Webmasters New: WebmasterConventions.com

10-06-2005	#38
MorganGrayson None $100 for every ImLive sign-up Join Date: Apr 2004 Posts: 4,321	Re: What's the best lube...